Cisco SCE2020-4XGBE-SM - How to Display All Subscribers Currently in Anonymous Groups; How to Display Current Configuration for a Specified Anonymous Group; How to Display Currently Configured Anonymous Groups; How to Display Currently Configured Templates for Anonymous Groups

9-26
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 9 Managing Subscribers
Monitoring Subscribers
How to display currently configured anonymous groups
Step 1 From the SCE> prompt, type show interface linecard 0 subscriber anonymous-group all and
press Enter.
How to display currently configured templates for anonymous groups
Step 1 From the SCE> prompt, type show interface linecard 0 subscriber templates and press Enter.
How to display current configuration for a specified anonymous group
Options
The following options are available:
• group-name — name of the anonymous subscriber group
Step 1 From the SCE> prompt, type show interface linecard 0 subscriber anonymous-group name
group-name and press Enter.
How to display subscribers in a specified anonymous group
Options
The following options are available:
• group-name — name of the anonymous subscriber group
Step 1 From the SCE> prompt, type show interface linecard 0 subscriber anonymous name group-name
and press Enter.
How to display all subscribers currently in anonymous groups
Step 1 From the SCE> prompt, type show interface linecard 0 subscriber anonymous and press Enter.