Cisco SCE2020-4XGBE-SM - Rdrformatterreportratepeaktime (1.3.6.1.4.1.5655.4.1.6.8); Rdrformatterprotocol (1.3.6.1.4.1.5655.4.1.6.9); Rdrformatterforwardingmode (1.3.6.1.4.1.5655.4.1.6.10); Rdrformattercategorytable (1.3.6.1.4.1.5655.4.1.6.11)

B-48
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Appendix B Proprietary MIB Reference
pcubeWorkgroup (1.3.6.1.4.1.5655.4)
rdrFormatterReportRatePeakTime (1.3.6.1.4.1.5655.4.1.6.8)
The time (in hundredths of a second) since the rdrFormatterReportRatePeak value occurred.
Syntax
TimeTicks
rdrFormatterProtocol (1.3.6.1.4.1.5655.4.1.6.9)
The RDR protocol currently in use.
Syntax
INTEGER {1 (other) — none of the following2 (RDRv1) — RDR protocol version 13 (RDRv2) —
RDR protocol version 2
}
rdrFormatterForwardingMode (1.3.6.1.4.1.5655.4.1.6.10)
The manner in which the RDR formatter sends the reports to the destinations.
Syntax
INTEGER {1 (other) — none of the following2 (redundancy) — all RDRs are sent to the
primary (active) destination, and all other destinations are in standby3
(simpleLoadBalancing) — each successive RDR is sent to a different destination, one
destination after the other, in a round robin manner4 (multicast) — all RDRs are sent to
all destinations
}
rdrFormatterCategoryTable (1.3.6.1.4.1.5655.4.1.6.11)
This table describes the different categories of RDRs and supplies some statistical information about the
RDRs sent to these categories
Syntax
Sequence of rdrFormatterCategoryEntry
Access RO
Access RO
Access RO
Access not-accessible