Cisco SCE2020-4XGBE-SM - Appendix B Proprietary MIB Reference; Pcube Enterprise MIB

B-2
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Appendix B Proprietary MIB Reference
pcube Enterprise MIB
pcube Enterprise MIB
The pcube Enterprise MIB splits into four main groups:
• • Products
• • Modules
• • Management
• • Workgroup
The pcube enterprise tree structure is defined in a MIB file named PCUBE-SMI.my.
Note The following object identifier represents the pcube Enterprise MIB:
1.3.6.1.4.1.5655, or iso.org.dod.internet.private.enterprise.pcube.
Figure B-1 illustrates the pcube Service Control Enterprise MIB structure.
Conventions used in the diagram:
• Dotted arrows surrounding a unit or units indicate that the component is described in the MIB file
specified below the line.
• A shadowed box indicates that the component is described in its own MIB file.
Figure B-1 Cisco Service Control MIB Structure
The pcubeProducts subtree
The pcubeProducts subtree contains the OIDs of Cisco Service Control products. These OIDs are used
only to describe the Cisco Service Control platforms, not as roots for other OIDs.
This subtree does not contain online data, just global definitions.
The pcubeProductsMIB is defined the MIB file: PCUBE-PRODUCTS-MIB.my
Pcube
5655
pcubeProducts
1
se2000
3
se1000
2
se100
1
pcubeModules
2
pcubeMgmt
3
pcubeConfigCopyMIB
1
pcubeEngageMIB
4
pcubeSeMIB
3
pcubeEngageConformance
1
pcubeSeConformance
1
pcubeEngageGroups
1
pcubeSeGroups
1
pcubeProductsMIB
2
pcubeWorkgroups
4
pcubeEngageObjs
2
pcubeSEObjs
pcubeSeMIB (Pcube SCEMIB) pcubeEngageMIB
(CISCO-SCAS
-BB MIB)
1
pcubeSeEvents
0
162751