Cisco SCE2020-4XGBE-SM - How to Display Operational and Configuration Information for All VAS Servers; How to Display the VAS Servers Used by a Specified Subscriber; How to Display Health Check Counters for a Specified VAS Server; Example

12-30
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 12 Value Added Services (VAS) Traffic Forwarding
Monitoring VAS Traffic Forwarding
How to Display Operational and Configuration Information for All VAS Servers
Step 1 From the SCE> prompt, type show interface linecard 0 VAS-traffic-forwarding VAS server-id all and
press Enter.
How to Display the VAS Servers Used by a Specified Subscriber
Step 1 From the SCE> prompt, type show interface linecard 0 subscriber name subscriber-name
VAS-servers and press Enter.
How to Display Health Check Counters for a Specified VAS Server
Step 1 From the SCE> prompt, type show interface linecard 0 VAS-traffic-forwarding VAS server-id
id-number counters health-check and press Enter.
Example
SCE>show interface linecard 0 VAS-traffic-forwarding VAS server-id 0
Health Checks statistics for VAS server '0' Upstream Downstream
------------------------------------------------------------------------
Flow Index '0'
-----------------
Total packets sent : 31028 : 31027 :
Total packets received : 31028 : 31027 :
Good packets received : 31028 : 31027 :
Error packets received : 0 : 0 :
Not handled packets : 0 : 0 :
Average roundtrip (in millisecond) : 0 : 0 :
Error packets details : : :
--------------------- : : :
Reordered packets : 0 : 0 :
Bad Length packets : 0 : 0 :
IP Checksum error packets : 0 : 0 :
L4 Checksum error packets : 0 : 0 :
L7 Checksum error packets : 0 : 0 :
Bad VLAN tag packets : 0 : 0 :
Bad Device ID packets : 0 : 0 :
Bad Server ID packets : 0 : 0 :