Cisco SCE2020-4XGBE-SM - How to Remove a Specific Anonymous Subscriber Group; Options; How to Remove All Anonymous Subscriber Groups; How to Remove All Anonymous Subscribers

9-12
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 9 Managing Subscribers
Removing Subscribers and Templates
How to Remove a Specific Anonymous Subscriber Group
Options
The following option is available:
• group-name — the name of the anonymous subscriber group to be removed
Step 1 From the SCE(config if)# prompt, type no subscriber anonymous-group name group-name and press
Enter.
Removes the specified anonymous subscriber group.
How to Remove All Anonymous Subscriber Groups
Step 1 From the SCE(config if)# prompt, type no subscriber anonymous-group all and press Enter.
Removes all anonymous subscriber groups.
How to Remove All Anonymous Subscribers
Step 1 From the SCE# prompt, type clear interface linecard 0 subscriber anonymous all and press
Enter.
Removes all anonymous subscribers.
Note The clear subscriber anonymous command is a Privileged Exec command.
How to Remove All Subscriber Templates
Step 1 From the SCE(config if)# prompt, type default subscriber template all and press Enter.
Removes all subscriber templates.
All anonymous subscribers will be assigned to the default subscriber template.