Cisco SCE2020-4XGBE-SM - How to Display a Listing of Subscriber Properties; How to Display Complete Information for a Specified Subscriber; How to Display Values of Subscriber Properties for a Specified Subscriber

9-24
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 9 Managing Subscribers
Monitoring Subscribers
Use the following commands to display subscriber information:
• show interface linecard 0 subscriber properties
• show interface linecard 0 subscriber name ‘name’
• show interface linecard 0 subscriber name ‘name’ mappings
• show interface linecard 0 subscriber name ‘name’ counters
• show interface linecard 0 subscriber name ‘name’ properties
• show interface linecard 0 subscriber name ‘name’ vas-servers
How to display a listing of subscriber properties
Step 1 From the SCE> prompt, type show interface linecard 0 subscriber properties and press Enter.
How to display complete information for a specified subscriber
Use this command to display complete information for a specified subscriber, including all values of
subscriber properties and mappings.
Options
The following options are available:
• name — subscriber name
Step 1 From the SCE> prompt, type show interface linecard 0 subscriber name name and press Enter.
How to display values of subscriber properties for a specified subscriber
Options
The following options are available:
• name — subscriber name
Step 1 From the SCE> prompt, type show interface linecard 0 subscriber name name properties and
press Enter.