Cisco SCE2020-4XGBE-SM - Pmoduleattackobjectscleartime (1.3.6.1.4.1.5655.4.1.3.1.1.14); Pmoduleadminstatus (1.3.6.1.4.1.5655.4.1.3.1.1.15); Pmoduleoperstatus (1.3.6.1.4.1.5655.4.1.3.1.1.16); Linktable (1.3.6.1.4.1.5655.4.1.4.1)

B-39
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Appendix B Proprietary MIB Reference
pcubeWorkgroup (1.3.6.1.4.1.5655.4)
pmoduleAttackObjectsClearTime (1.3.6.1.4.1.5655.4.1.3.1.1.14)
The time (in hundredths of a second) since the attack objects were cleared. Writing a 0 to this object
causes the counters to be cleared.
Syntax
TimeTicks
pmoduleAdminStatus (1.3.6.1.4.1.5655.4.1.3.1.1.15)
Indicates whether the module is configured to handle traffic on startup or reboot (active), to be the hot
standby.
Syntax
INTEGER {1 (other) — none of the following2 (primary) — Handle traffic on startup.3
(secondary) — Fail-over module on startup.
}
pmoduleOperStatus (1.3.6.1.4.1.5655.4.1.3.1.1.16)
Indicates whether the module is currently handling (active), or is on standby.
Syntax
INTEGER {1 (other) — none of the following2 (active) — Currently is handling traffic.3
(standby) — Currently is the fail-over module.
}
linkTable (1.3.6.1.4.1.5655.4.1.4.1)
A list of link entries containing information regarding the configuration and status of the links that pass
through the SCE platform and carry in-band traffic.
The number of entries is determined by the number of modules in the chassis and the number of links
on each module.
Syntax
Sequence of linkEntry
Access RO
Access RO
Access RO
Access not-accessible