Cisco SCE2020-4XGBE-SM - Pportentry (1.3.6.1.4.1.5655.4.1.10.1.1); Pportmoduleindex (1.3.6.1.4.1.5655.4.1.10.1.1.1); Pportindex (1.3.6.1.4.1.5655.4.1.10.1.1.2); Pporttype (1.3.6.1.4.1.5655.4.1.10.1.1.3)

B-74
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Appendix B Proprietary MIB Reference
pcubeWorkgroup (1.3.6.1.4.1.5655.4)
pportEntry (1.3.6.1.4.1.5655.4.1.10.1.1)
Entry containing information for a specified port on a module.
Index
{pportModuleIndex, pportIndex}
Syntax
SEQUENCE {pportModuleIndex pportIndex pportType pportNumTxQueues pportIfIndex
pportAdminSpeed pportAdminDuplex pportOperDuplex pportLinkIndex pportOperStatus }
pportModuleIndex (1.3.6.1.4.1.5655.4.1.10.1.1.1)
An index value ( pmoduleIndex ) that uniquely identifies the module where the port is located.
Syntax
INTEGER (1..255)
pportIndex (1.3.6.1.4.1.5655.4.1.10.1.1.2)
An index value that uniquely identifies the port within the specified module. The value is determined by
the location of the port on the module.
Valid entries are 1 to the value of pmoduleNumPorts for this module.
Syntax
INTEGER (1..255)
pportType (1.3.6.1.4.1.5655.4.1.10.1.1.3)
The type of physical layer medium dependent interface on the port.
Syntax
INTEGER {1 (other) — none of the following11 (e100BaseTX) — UTP Fast Ethernet (Cat 5)28
(e1000BaseSX) — Short Wave fiber Giga Ethernet
}
Access not-accessible
Access RO
Access RO
Access RO