Cisco SCE2020-4XGBE-SM - Assigning the SCMP Peer Device to an Anonymous Group; Deleting Subscribers Managed by an SCMP Peer Device; Options

14-13
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 14 Managing the SCMP
Configuring the SCMP
Assigning the SCMP Peer Device to an Anonymous Group
This command defines the specified anonymous group to be the IP range of the SCMP peer device. You
must define the specified SCMP peer device before assigning the anonymous group.
Options
The following options are available:
• group-name — Name of the anonymous subscriber group to be associated with the specified SCMP
peer device.
• range (optional) — IP range defined for the anonymous group
• template (optional) — group template assigned to the anonymous group
• peer-device-name — User-assigned name of the SCMP peer device
Step 1 From the SCE(config if)# prompt, type subscriber anonymous-group name group-name IP-range
range [template template] scmp name peer-device-name and press Enter.
How to Remove an Anonymous Group from the SCMP Peer Device
This command defines the specified anonymous group to be the IP range of the SCMP peer device. You
must define the specified SCMP peer device before assigning the anonymous group.
Step 1 From the SCE(config if)# prompt, type no subscriber anonymous-group name group-name and press
Enter.
Deleting Subscribers Managed by an SCMP Peer Device
Use this command to clear all the subscribers that are managed by a specified SCMP peer device.
Options
The following options are available:
• peer_device_name — User-assigned name of the SCMP peer device
Step 1 From the SCE(config if)# prompt, type no subscriber scmp name peer-device-name all and press
Enter.