Cisco SCE2020-4XGBE-SM - Tpflowscapacityutilizationpeak (1.3.6.1.4.1.5655.4.1.9.1.1.39); Tpflowscapacityutilizationpeaktime (1.3.6.1.4.1.5655.4.1.9.1.1.40); Tpserviceloss (1.3.6.1.4.1.5655.4.1.9.1.1.41); Pporttable (1.3.6.1.4.1.5655.4.1.10.1)

B-73
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Appendix B Proprietary MIB Reference
pcubeWorkgroup (1.3.6.1.4.1.5655.4)
tpFlowsCapacityUtilizationPeak (1.3.6.1.4.1.5655.4.1.9.1.1.39)
The peak value of tpFlowsCapacityUtilization since the last time it was cleared or the system started.
Syntax
INTEGER (1..100)
tpFlowsCapacityUtilizationPeakTime (1.3.6.1.4.1.5655.4.1.9.1.1.40)
The time (in hundredths of a second) since the tpFlowsCapacityUtilizationPeak value occurred.
Syntax
TimeTicks
tpServiceLoss (1.3.6.1.4.1.5655.4.1.9.1.1.41)
The relative amount of service loss in this traffic processor, in units of 0.001%, per second in the last
minute or since the last time this counter was cleared.
Syntax
INTEGER (1..100000)
pportTable (1.3.6.1.4.1.5655.4.1.10.1)
A list of port entries.
The number of entries is determined by the number of modules in the chassis and the number of ports
on each module.
Syntax
Sequence of pportEntry
Access RO
Access RO
Access RO
Access not-accessible