Cisco SCE2020-4XGBE-SM - How to Enable Aging for Introduced Subscribers; How to Disable Aging for Anonymous Group Subscribers; How to Disable Aging for Introduced Subscribers; How to Set the Aging Timeout Period for Anonymous Group Subscribers

9-39
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 9 Managing Subscribers
Configuring Subscriber Aging
How to Enable Aging for Introduced Subscribers
Note Introduced subscriber aging is not supported when using VPN-based subscribers
Step 1 From the SCE(config if)# prompt, type subscriber aging introduced and press Enter.
How to Disable Aging for Anonymous Group Subscribers
Step 1 From the SCE(config if)# prompt, type no subscriber aging anonymous and press Enter.
How to Disable Aging for Introduced Subscribers
Step 1 From the SCE(config if)# prompt, type no subscriber aging introduced and press Enter.
How to Set the Aging Timeout Period for Anonymous Group Subscribers
Options
The following option is available:
• aging-time — the time interval, in minutes, after which an inactive subscriber sill be aged.
Step 1 From the SCE(config if)# prompt, type no subscriber aging anonymous timeout aging-time and press
Enter.