9-42
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 9 Managing Subscribers
Configuring the SCE Platform/SM Connection
Configuring the SM-SCE Platform Connection Timeout
You can also configure the timeout interval; the length of time that the SM-SCE platform connection is
disrupted before a failed connection is recognized and the configured behavior is applied.
Options
The following option is available:
• interval — the timeout interval in seconds
Step 1 From the SCE(config if)# prompt, type subscriber sm-connection-failure timeout interval and press
Enter.
Configures the connection timeout.
To Next Page
Loading...
