Cisco SCE2020-4XGBE-SM - Rdrformatterdeststatus (1.3.6.1.4.1.5655.4.1.6.2.1.4); Rdrformatterdestconnectionstatus (1.3.6.1.4.1.5655.4.1.6.2.1.5); Rdrformatterdestnumreportssent (1.3.6.1.4.1.5655.4.1.6.2.1.6); Rdrformatterdestnumreportsdiscarded (1.3.6.1.4.1.5655.4.1.6.2.1.7)

B-45
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Appendix B Proprietary MIB Reference
pcubeWorkgroup (1.3.6.1.4.1.5655.4)
rdrFormatterDestStatus (1.3.6.1.4.1.5655.4.1.6.2.1.4)
Indicates whether this destination is the active one.
In redundancy and simple-load-balancing modes there can be only one ‘active’ destination, which is the
one to which the reports are sent. In multicast mode all destinations receive the active mode.
Syntax
INTEGER {1 (other) — none of the following2 (active) — this destination is where the
reports are sent3 (standby) — this destination is a backup
}
rdrFormatterDestConnectionStatus (1.3.6.1.4.1.5655.4.1.6.2.1.5)
The status of TCP connection to this destination.
Syntax
INTEGER {1 (other) — none of the following2 (up) — the TCP connection to this
destination is up3 (down) — the TCP connection to this destination is down
}
rdrFormatterDestNumReportsSent (1.3.6.1.4.1.5655.4.1.6.2.1.6)
The number of reports sent by the RDR-formatter to this destination.
Syntax
Unsigned32 (0...4294967295)
rdrFormatterDestNumReportsDiscarded (1.3.6.1.4.1.5655.4.1.6.2.1.7)
The number of reports dropped by the RDR-formatter at this destination.
Syntax
Unsigned32 (0...4294967295)
Access RO
Access RO
Access RO
Access RO