Cisco SCE2020-4XGBE-SM - How to Monitor Subscriber MPLS;VPN Mappings

13-29
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 13 MPLS/VPN Support
Managing MPLS/VPN Support
To Remove a Specified VPN Mapping from a Specified Subscriber
Step 1 From the shell prompt, type the following command: p3psubs –-remove-mappings
-–subscriber=SUB-NAME --vpn=VPN-NAME
To Remove a Specified Community-based Mapping from a Specified Subscriber
Step 1 From the shell prompt, type the following command: p3psubs –-remove-mappings
-–subscriber=SUB-NAME --community=AS:value@VPN-NAME
How to Monitor Subscriber MPLS/VPN Mappings
Use the p3subs utility to manage VPNs.
Step 1 From the shell prompt, type the following command: p3subs --show-all-mappings
--subscriber=SUB-NAME