Cisco SCE2020-4XGBE-SM - Chapter 4 Utilitie

4-2
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 4 Utilities
The Setup Command
admin password Admin level password
Character string from 4-100 characters beginning with an alpha
character.
.root password Root level password.
Character string from 4-100 characters beginning with an alpha
character.
password encryption status Enable or disable password encryption?
Time Settings
time zone name and offset Standard time zone abbreviation and minutes offset from UTC.
local time and date Current local time and date. Use the format:
00:00:00 1 January 2007
SNTP Configuration
broadcast client status Sets the status of the SNTP broadcast client.
If enabled, the SCE will synchronize its local time with updates
received from SNTP broadcast servers.
unicast query interval Interval in seconds between unicast requests for update (64 – 1024)
unicast server IP address IP address of the SNTP unicast server.
DNS Configuration
DNS lookup status Enable or disable IP DNS-based hostname translation.
default domain name Default domain name to be used for completing unqualified host
names
IP address IP address of domain name server. (maximum of three servers)
RDR Formatter Destination Configuration
IP address IP address of the RDR-formatter destination
TCP port number TCP port number of the RDR-formatter destination
Access Control Lists
Access Control List number How many ACLs will be necessary? What IP addresses will be
permitted/denied access for each management interface? You may
want ACLs for the following:
• Any IP access
• Telnet access
• SNMP GET access
• SNMP SET access
list entries (maximum 20 per list) IP address, and whether permitted or denied access.
IP access ACL ID number of the ACL controlling IP access.
telnet ACL ID number of the ACL controlling telnet access.
SNMP Configuration
Table 4-1 Setup Command Parameters (continued)
Parameter Definition