xxxii
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
About this Guide
Introduction
OL-7827-10 3.5.0
January, 2009
Added the following features:
• Flow Capture, page 4-12
• Intelligent Traffic Mirroring, page 12-47
• Subscriber Database: Capacity and Limits, page 9-4
• Configuring the Actual Maximum Number of
Subscribers, page 9-37
OL-7827-09 3.1.6
May, 2008
Added the following new features
• IPinIP tunneling option
• Asymmetric L2 mode
• Running only SSHv2 (by disabling SSHv1)
OL-7827-08 3.1.5
November, 2007
The following chapter was updated to describe updated
VPN functionality:
• Managing Subscribers
Various minor corrections
OL-7827-07 3.1.5 LA
August, 2007
The following chapters were updated to describe the
updated VPN functionality:
• Configuring the Line Interface (How to Configure
Tunneling Protocols)
• Managing Subscribers
• MPLS/VPN Support
The following chapter was updated to describe the
updated TOS marking functionality:
• Configuring the Line Interface
Minor changes were made in the following chapters to
clarify certain topics and issues:
• Configuring the Line Interface: Hardware packet
drops
• Value Added Services (VAS) Traffic Forwarding:
Requirements for VAS Servers
• Redundancy and Fail-Over: Emphasize L1
connection of cascade ports.
• Proprietary MIB Reference
OL-7827-06 3.1.0
May, 2007
Added the following new feature:
• Asymmetric Routing Topology
The following chapter was updated to include the
NetflowV9 protocol option:
• Raw Data Formatting: The RDR Formatter and
NetFlow Exporting
Table 1 Document Revision History (continued)
Revision
Cisco Service Control
Release and Date Change Summary
To Next Page
Loading...
