Cisco SCE2020-4XGBE-SM - Page 16

Contents
xiv
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
How to Remove All TIRs 9-33
How to Remove Mappings from a Specified TIR 9-33
How to Remove Mappings from a Specified IP Range 9-34
How to Import and Export TIRs 9-34
About TIR csv Files 9-34
Options 9-34
How to Import TIRs from a csv File 9-35
How to Export TIRs to a csv File 9-35
How to Monitor TIRs 9-35
How to Display Traffic Processor Mappings State 9-36
How to Display Configuration of a Specified TIR 9-36
How to Display Configuration of All TIRs 9-36
How to Display Mappings Related to a Specified TIR 9-36
How to Display the Number of Subscribers with Mappings Related to a Specified TIR 9-36
How to Display Complete Subscriber Information 9-36
How to Display All Subscribers Mapped to a Specified IP Range 9-37
How to Display the Number of Subscribers Mapped to a Specified IP Range 9-37
Configuring the Actual Maximum Number of Subscribers 9-37
How to Override the Configured Capacity Option 9-37
How to Restore the Configured Capacity Option 9-38
How to Monitor the Maximum Number of Subscribers 9-38
Configuring Subscriber Aging 9-38
How to Enable Aging for Anonymous Group Subscribers 9-38
How to Enable Aging for Introduced Subscribers 9-39
How to Disable Aging for Anonymous Group Subscribers 9-39
How to Disable Aging for Introduced Subscribers 9-39
How to Set the Aging Timeout Period for Anonymous Group Subscribers 9-39
Options 9-39
How to Set the Aging Timeout Period for Introduced Subscribers 9-40
Options 9-40
How to Display Aging for Anonymous Group Subscribers 9-40
How to Display Aging for Introduced Subscribers 9-40
Configuring the SCE Platform/SM Connection 9-40
Options 9-41
Configuring the Behavior of the SCE Platform in Case of Failure of the SM 9-41
Options 9-41
Configuring the SM-SCE Platform Connection Timeout 9-42
Options 9-42