Cisco SCE2020-4XGBE-SM - Page 19

Contents
xvii
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Options 11-19
Preventing Attack Filtering 11-20
How to Configure a dont-filter Setting for a Specified Situation 11-20
How to Remove a dont-filter Setting from a Specified Situation 11-20
How to Remove All dont-filter Settings 11-20
Forcing Attack Filtering 11-20
How to Configure a force-filter Setting for a Specified Situation 11-21
How to Remove a force-filter Setting from a Specified Situation 11-21
How to Remove All force-filter Settings 11-21
Monitoring Attack Filtering 11-21
Monitoring Attack Filtering Using SNMP Traps 11-21
Monitoring Attack Filtering Using CLI Commands 11-23
How to display a specified attack detector configuration 11-24
How to display the default attack detector configuration 11-25
How to display all attack detector configurations 11-26
How to display filter state (enabled or disabled) 11-26
How to display configured threshold values and actions 11-26
How to display the current counters 11-28
How to display all currently handled attacks 11-28
How to display all existing force-filter settings 11-28
How to display all existing don't-filter settings 11-28
How to display the list of ports selected for subscriber notification 11-29
How to find out whether hardware attack filtering has been activated 11-29
The Attack Log 11-29
How to View the Attack Log 11-30
How to Copy the Attack Log to a File 11-30
CHAPTER 12 Value Added Services (VAS) Traffic Forwarding 12-1
Introduction 12-1
Information About VAS Traffic Forwarding 12-1
VAS Service Goals 12-2
How VAS Traffic Forwarding Works 12-2
Requirements for VAS Servers 12-4
VAS Traffic Forwarding and SCA BB 12-5
VLAN Tags for VAS Traffic Forwarding 12-5
Service Flow 12-6
Data Flow 12-6
Non-VAS Data Flow 12-7
VAS Data Flow 12-8