Cisco SCE2020-4XGBE-SM - Page 392

13-26
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
Chapter 13 MPLS/VPN Support
Managing MPLS/VPN Support
To List All Subscribers for a Specified VPN
Step 1 From the shell prompt, type the following command: p3vpn –-show-sub --vpn=VPN-Name
Listing All Subscribers for a Specified VPN: Example
p3vpn –show-sub --vpn=vpn1
sub1: 10.1.1.0/24@vpn1
sub2: 20.1.1.0/24@vpn1
Command terminated successfully
To Display the Mappings for a Specified VPN
Step 1 From the shell prompt, type the following command: p3vpn –-show --vpn=VPN-Name
Listing All Subscribers for a Specified VPN: Example
p3vpn --show --vpn=vpn1
Name: vpn1
Domain: subscribers
Mappings:
MPLS/VPN: 1:1000@10.0.0.1 (no BGP information)
MPLS/VPN: 1:1000@10.0.0.2 label: 10 IP range: 1.1.1.1/32
Command terminated successfully
How to Manage VPN Mappings
• To Remove All Existing Mappings from a Specified VPN, page 13-26
• To Remove a Specified Mapping from a Specified VPN, page 13-26
To Remove All Existing Mappings from a Specified VPN
Step 1 From the shell prompt, type the following command: p3vpn –-remove-all-mappings
--vpn=VPN-Name
To Remove a Specified Mapping from a Specified VPN
Step 1 From the shell prompt, type the following command: p3vpn –-remove-mappings --vpn=VPN-Name
--mpls-vpn=RT@PE,(RT@PE2, RT@PE3,...)