Comet Synertia RF - Page 119

106 User Manual Synertia® RF Generator
The information contained in this manual is subject to change by Comet Yxlon without prior notice.
Parameter
No.
Parameter
Name
Example
Value
Unit
Type
Enum
Values
Comment /
Description
1302
Pulse period
10
(
?100 µs)
10
µs
int (32 bit)
The pulse period can be set as a
number of 10
µs steps when the
unit is operating in
internal pulse
mode.
1303
Duty cycle
50
(
?5.0 %)
0.1
%
int (32 bit)
The pulse duty cycle can be set
as a number of 0.1
% steps when
the unit is operating in internal
pulse mode.
Actual Values
" Control
8000
State
int (32 bit)
The current
state of the unit can
be retrieved.
1
RF Off = System Ready
2
RF On
3
Error
8011
Frequency
Hz
int (32 bit)
The current RF output frequency
in Hz can be retrieved from the
unit.
8021
Forward
power
mW
int (32 bit)
The
current forward power in
mW can be retrieved from the
unit.
8022
Reflected
power
mW
int (32 bit)
The current reflected power in
mW can be retrieved from the
unit.
8023
Load power
mW
int (32 bit)
The current load power in mW
can be
retrieved from the unit.
8024
RF voltage
mV
int (32 bit)
The current RF voltage in mV can
be retrieved from the unit.
8025
RF current
mA
int (32 bit)
The current RF current in mA can
be retrieved from the unit.