Current/Total/Max List: View-only field.
Current: This shows the number of current registered QCL setting(s).
Total: This shows the number of total registered QCL setting(s).
Max List: The shows the number of maximum QCL settings that are available for
registration. The default number is 12.
QCE Type: Click the pull-down menu to select the desired privilege for the QCE type operation.
Ethernet Type: When you choose Ethernet Type as your preferred QCE Type, you can further
specify your Ethernet Type in this field, such as 88A8, 9100, 9200, 9300.
VLAN ID: When you choose VLAN ID as your preferred QCE Type, you can further specify
VLAND ID value from 1 to 4094.
TCP/UDP Port: When you choose UDP/TCP Port as your preferred QCE Type, you can further
specify TCP/UDP Port by selecting “Specific” or “Range” from the pull-down menu. “Specific”
allows you to assign “TCP/UDP Port No.”. On the other hand, “Range” allows you to assign
TCP/UDP port range in “TCP/UDP Port Range” field.
DSCP: When you choose DSCP as your preferred QCE Type, you can further specify DSCP value.
Traffic Class: When you choose Ethernet Type, VLAN ID, UDP/TCP Port or DSCP as your
preferred QCE Type, you can further specify traffic class queues. Four types of Traffic Class you
can choose from are “Low”, “Normal”, “Medium” and “High”.
Priority Class: When you choose ToS or Tag Priority as your preferred QCE Type, you can
assign a priority level (Low, Normal, Medium or High) to the specific priority class.
To Next Page
Loading...
Need help?
General
