Configure Trust Port Setting:
Trust Port: Select āVā if you would like ports to become trust ports. The trusted ports will not
discard DHCP messages.
For example:
A DHCP request is from Port 1 that is marked as both Opt82 port and trust port.
A. If a DHCP request is with Opt82 Agent information and then the Managed Switch will forward it.
B. If a DHCP request is without Opt82 Agent information and then the Managed Switch will add
Opt82 Agent information and forward it.
A DHCP request is from Port 2 that is marked as Opt82 port.
A. If a DHCP request is with Opt82 Agent information and then the Managed Switch will drop it
because it is not marked as a trust port.
B. If a DHCP request is without Opt82 Agent information and then the Managed Switch will add
Opt82 Agent information and then forward it.
To Next Page
Loading...
