CTS FOS-3126-PLUS SERIES User Manual

182
 Copy dhcpd.conf to /etc/dhcp/ directory
Copy dhcpd.conf file provided by the vendor to /etc/dhcp/ directory.
Please note that each vendor has their own way to define auto provisioning. Make sure to use the
file provided by the vendor.
 Enable and run DHCP service
1. Choose dhcpd.
2. Enable DHCP service.
3. Start running DHCP service.
NOTE: DHCP service can also be enabled by CLI. Issue “dhcpd” command to enable DHCP
service.
1
2
3

CTS FOS-3126-PLUS SERIES Specifications

General

Brand	CTS
Model	FOS-3126-PLUS SERIES
Category	Switch
Language	English