1. Enable or disable broadcast/multicast/unknown unicast storm control.
Switch(config)# security
storm-protection broadcast
[1-1024k]
Specify the maximum broadcast packets
per second (pps). Any broadcast packets
exceeding the specified threshold will then
be dropped.
The packet rates that can be specified are
listed below:
1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1k, 2k,
4k, 8k, 16k, 32k, 64k, 128k, 256k, 512k,
1024k
NOTE: To view a list of allowable values
that can be specified you can press
“spacebar” and then followed by “?”. For
example, “Switch(config)# security storm-
protection broadcast ?”
Switch(config)# security
storm-protection multicast [1-
1024k]
Specify the maximum unknown multicast
packets per second (pps). Any unknown
multicast packets exceeding the specified
threshold will then be dropped.
The packet rates that can be specified are
listed below:
1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1k, 2k,
4k, 8k, 16k, 32k, 64k, 128k, 256k, 512k,
1024k
NOTE: To view a list of allowable values
that can be specified you can press
“spacebar” and then followed by “?”. For
example, “Switch(config)# security storm-
protection multicast ?”
Switch(config)# security
storm-protection unicast [1-
1024k]
Specify the maximum unicast packets per
second (pps). Any unicast packets
exceeding the specified threshold will then
be dropped.
The packet rates that can be specified are
listed below:
1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1k, 2k,
4k, 8k, 16k, 32k, 64k, 128k, 256k, 512k,
1024k
NOTE: To view a list of allowable values
that can be specified you can press
“spacebar” and then followed by “?”. For
example, “Switch(config)# security storm-
protection unicast ?”
Switch(config)# no security
storm-protection broadcast
Disable broadcast storm control.
To Next Page
Loading...
