CTS FOS-3128 Series - Page 80

80
No command
Switch(config-if-PORT-
PORT)# no security mac-limit
Disable MAC Limit function of the
selected port(s).
Switch(config-if-PORT-
PORT)# no security mac-limit
maximum
Reset the MAC Limit back to the default
“0”. “0” indicates there is no limit on
specified ports.
Examples of Security command
Switch(config-if-1-3)# security mac-limit
Enable Port 1~Port 3’s MAC Limit
function.
Switch(config-if-1-3)# security mac-limit
maximum 500
Configure the maximum 500 sets of
MAC address that can be learned for
Port1~Port 3.