D-Link DGS-3000 series - Page 206

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
202
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure dhcp_relay option 82:
DGS-3000-26TC:admin#config dhcp_relay option_82 state enable
Command: config dhcp_relay option_82 state enable
Success.
DGS-3000-26TC:admin#config dhcp_relay option_82 check disable
Command: config dhcp_relay option_82 check disable
Success.
DGS-3000-26TC:admin#config dhcp_relay option_82 policy replace
Command: config dhcp_relay option_82 policy replace
Success.
DGS-3000-26TC:admin#config dhcp_relay option_82 remote_id user_define “D-Link
L2 Switch”
Command: config dhcp_relay option_82 remote_id user_define "D-Link L2 Switch"
Success.
DGS-3000-26TC:admin#
20-7 config dhcp_relay option_82 circuit_id
Description
This command is used to configure the circuit id of DHCP relay agent information option 82 of the
Switch.
Format
config dhcp_relay option_82 circuit_id [default | vendor1]
Parameters
default – Specifies the cirecuit id of DHCP relay agent to default.
vendor1 - Specifies the cirecuit id of DHCP relay agent to vendor1.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.