D-Link DGS-3000 series - Page 207

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
203
Example
To configure the circuit ID as default:
DGS-3000-26TC:admin#config dhcp_relay option_82 circuit_id default
Command: config dhcp_relay option_82 circuit_id default
Success.
DGS-3000-26TC:admin#
20-8 enable dhcp_relay
Description
This command is used to enable the DHCP relay function on the Switch.
Format
enable dhcp_relay
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the DHCP relay function.
DGS-3000-26TC:admin#enable dhcp_relay
Command: enable dhcp_relay
Success.
DGS-3000-26TC:admin#
20-9 disable dhcp_relay
Description
This command is used to disable the DHCP relay function on the Switch.
Format
disable dhcp_relay
Parameters
None.