DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
233
DGS-3000-26TC:admin#show dos_prevention
Command: show dos_prevention
Trap:Disabled Log:Disabled Function Version : 1.01
DoS Type State Action Frame Counts
-------------------------- -------- ---------------- ------------
Land Attack Enabled Drop -
Blat Attack Enabled Drop -
TCP Null Scan Disabled Drop -
TCP Xmas Scan Disabled Drop -
TCP SYNFIN Disabled Drop -
TCP SYN SrcPort Less 1024 Disabled Drop -
Ping of Death Attack Disabled Drop -
TCP Tiny Fragment Attack Disabled Drop -
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
25-3 config dos_prevention trap
Description
This command is used to enable or disable DoS prevention trap state.
Format
config dos_prevention trap [enable | disable]
Parameters
enable - Enables DoS prevetion trap state.
disable - Disables DoS prevention trap state.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable DoS prevention trap:
DGS-3000-26TC:admin#config dos_prevention trap disable
Command: config dos_prevention trap disable
Success.
To Next Page
Loading...
