D-Link DGS-3000 series - Page 238

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
234
25-4 config dos_prevention log
Description
This command is used to enable or disable dos prevention log state.
Format
config dos_prevention log [enable | disable]
Parameters
enable - Enables DoS prevetion log state.
disable - Disables DoS prevention log state.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable DoS prevention log:
DGS-3000-26TC:admin#config dos_prevention log enable
Command: config dos_prevention log enable
Success.
DGS-3000-26TC:admin#