DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
263
Example
To remove a directory:
DGS-3000-26TC:admin#rd c:/abc
Command: rd c:/abc
Success.
31-4 cd
Description
This command is used to change the current directory. The current directory is changed under the
current drive. If you want to change the working directory to the directory in another drive, then you
need to change the current drive to the desired drive, and then change the current directory. The
current dr
ive and c
urrent d
irector
y will be disp
la
yed if the
<pathnam
e> is not sp
ecified.
Format
cd {<pathname>}
Parameters
<pathname> - (Optional) Specifies the directory to be navigated to. The path name can be
specified either as a full path name or partial name. For partial path name, it indicates the file
is in the current directory.
Restrictions
None.
Example
To change to other directory or display current directory path:
Command: cd
Current work directory: "/c:".
31-5 dir
Description
This command is used to list all the files located in a directory of a drive.
If pathname is not specified, then all of the files in the specified drive will be displayed. If none of
the parameters are specified, the files in the current drive will be displayed.
To Next Page
Loading...
