DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
348
37-23 delete jwac
Description
This command is used to delete JWAC users from the local database.
Format
delete jwac [user <username 15> | all_users]
Parameters
user - Specifies the user name to be deleted.
<username 15> - Specifies the user name to be deleted. The user name can be up to 15
all_users - Specifies all user accounts in the local database will be deleted.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete a JWAC user from the local database:
DGS-3000-26TC:admin#delete jwac user 112233
Command: delete jwac user 112233
Success.
37-24 show jwac user
Description
This command is used to display JWAC users in the local database.
Format
show jwac user
Parameters
None.
Restrictions
None.
To Next Page
Loading...
