D-Link DGS-3000 series - Page 355

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
351
Format
config jwac authorization attributes {radius [enable | disable] | local [enable | disable]}(1)
Parameters
radius - If specifies to enable, the authorized data assigned by the RADUIS server will be
accepted if the global authorization network is enabled.The default state is enabled.
enable - Specifies to enable authorized data assigned by the RADUIS server to be accepted.
disable - Specifies to disable authorized data assigned by the RADUIS server from being
accepted.
local - If specifies to enable, the authorized data assigned by the local database will be accepted
if the global authorization network is enabled. The default state is enabled.
enable - Specifies to enable authorized data assigned by the local database to be accepted.
disable - Specifies to disable authorized data assigned by the local database from being
accepted.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the configuration authorized from the local database:
DGS-3000-26TC:admin#config jwac authorization attributes local disable
Command: config jwac authorization attributes local disable
Success.
DGS-3000-26TC:admin#
37-28 show jwac update_server
Description
This command is used to display the JWAC update server.
Format
show jwac update_server
Parameters
None.
Restrictions
None.