D-Link DGS-3000 series - Page 476

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
472
DGS-3000-26TC:admin#config igmp_snooping multicast_vlan_group_profile test add
225.1.1.1
Command: config igmp_snooping multicast_vlan_group_profile test add 225.1.1.1
Success.
DGS-3000-26TC:admin#
50-5 delete igmp_snooping multicast_vlan_group_profile
Description
This command is used to delete an IGMP snooping multicast group profile on the Switch. Specifies
a profile name to delete it. Specifies all to remove all profiles along with the groups that belong to
that profile.
Format
delete igmp_snooping multicast_vlan_group_profile [profile_name <profile_name 1-32> | all]
Parameters
profile_name - Specifies the multicast VLAN profile name.
<profile_name 1-32> - Enter the multicast VLAN profile name here. This name can be up to
32 characters long.
all - Specifies to delete all the multicast VLAN profiles.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete an IGMP snooping multicast group profile with the name “MOD”:
DGS-3000-26TC:admin#delete igmp_snooping multicast_vlan_group_profile
profile_name MOD
Command: delete igmp_snooping multicast_vlan_group_profile profile_name MOD
Success.
DGS-3000-26TC:admin#
50-6 show igmp_snooping multicast_vlan_group_profile
Description
This command is used to show the IGMP snooping multicast group profiles.
Format
show igmp_snooping multicast_vlan_group_profile {< profile_name 1-32>}