D-Link DGS-3000 series - Page 55

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
51
DGS-3000-26TC:admin#config 802.1x guest_vlan ports 2-8 state enable
Command: config 802.1x guest_vlan ports 2-8 state enable
Warning, The ports are moved to Guest VLAN.
Success.
DGS-3000-26TC:admin#
4-20 show 802.1x guest_vlan
Description
This command is used to show the information of guest VLANs.
Format
show 802.1x guest_vlan
Parameters
None.
Restrictions
None.
Example
To show 802.1X guest VLAN on the Switch:
DGS-3000-26TC:admin#show 802.1x guest_vlan
Command: show 802.1x guest_vlan
Guest VLAN Setting
-----------------------------------------------------------
Guest VLAN : guestVLAN
Enabled Guest VLAN Ports : 2-8
DGS-3000-26TC:admin#
4-21 show auth_statistics
Description
This command is used to display information of authenticator statistics.
Format
show auth_statistics {ports <portlist>}