DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
621
69-31 config snmp coldstart_traps
Description
This command is used to configure the trap for coldstart event.
Format
config snmp coldstart_traps [enable | disable]
Parameters
enable - Enables the trap of the coldstart event. The default state is enabled.
disable - Disables the trap of the coldstart event.
Restrictions
Only Administrators can issue this command.
Example
To configure the trap for coldstart event:
DGS-3000-26TC:admin#config snmp coldstart_traps enable
Command: config snmp coldstart_traps enable
Success.
69-32 config snmp warmstart_traps
Description
This command is used to configure the trap state for warmstart event.
Format
config snmp warmstart_traps [enable | disable]
Parameters
enable - Enables the trap of the warmstart event. The default state is enabled.
disable - Disables the trap of the warmstart event.
Restrictions
Only Administrators can issue this command.
To Next Page
Loading...
