D-Link DGS-3000 series - Page 659

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
655
Example
To download firmware from TFTP:
DGS-3000-26TC:admin#download firmware_fromTFTP 10.54.71.1 src_file px.had
Command: download firmware_fromTFTP 10.54.71.1 src_file px.had
Connecting to server................... Done.
Download firmware...................... Done. Do not power off!
Please wait, programming flash......... Done.
DGS-3000-26TC:admin#
To download configuration from TFTP:
DGS-3000-26TC:admin#download cfg_fromTFTP 10.54.71.1 src_file cfg01.txt
Command: download cfg_fromTFTP 10.54.71.1 src_file cfg01.txt
Connecting to server.................…. Done.
Download configuration................. Done.
DGS-3000-26TC:admin#
75-2 upload
Description
This command is used to upload firmware and configuration from device to TFTP/FTP server.
Format
upload [cfg_toTFTP {[<ipaddr> | <ipv6addr> | <domain_name 255>] dest_file <path_filename
64> {src_file <pathname 64>} {[include | exclude | begin] <filter_string 80> {<filter_string
80> {<filter_string 80>}} {[include | exclude | begin] <filter_string 80> {<filter_string 80>
{<filter_string 80>}} {[include | exclude | begin ] <filter_string 80> {<filter_string 80>
{<filter_string 80>}}}}}} | log_toTFTP{ [<ipaddr> | <ipv6addr> | <domain_name 255>]
dest_file <path_filename 64>} | attack_log_toTFTP {[<ipaddr> | <ipv6addr> | <domain_name
255>] dest_file <path_filename 64>} | firmware_toTFTP {[<ipaddr> | <ipv6addr> |
<domain_name 255>] dest_file <path_filename 64> {src_file <path_filename 64>}} |
cfg_toFTP [<ipaddr> {tcp_port <tcp_port_number 1-65535>} dest_file <path_filename 64> |
ftp: <string user:password@ipaddr:tcpport/path_filename>] {src_file <path_filename 64>}
{[include | exclude | begin] <filter_string 80> {<filter_string 80> {<filter_string 80>}} {[include
| exclude | begin ] <filter_string 80> {<filter_string 80>{<filter_string 80>}} {[include |
exclude | begin ] <filter_string 80> {<filter_string 80> {<filter_string 80>}}}}} | log_toFTP
[<ipaddr> {tcp_port <tcp_port_number 1-65535>} dest_file <path_filename 64> | ftp: <string
user:password@ipaddr:tcpport/path_filename>] | attack_log_toFTP [<ipaddr> {tcp_port
<tcp_port_number 1-65535>} dest_file <path_filename 64> | ftp: <string
user:password@ipaddr:tcpport/path_filename>] | firmware_toFTP [<ipaddr> {tcp_port
<tcp_port_number 1-65535>} dest_file <path_filename 64> | ftp: <string
user:password@ipaddr:tcpport/path_filename>] {src_file <pathname 64>}]