D-Link DGS-3000 series - Page 660

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
656
Parameters
cfg_toTFTP – Specifies that the configuration file will be uploaded to the TFTP server.
<ipaddr> - The IP address of the TFTP server.
<ipv6addr> - (Optional) The IPv6 address of the TFTP server.
<domain_name 255> - (Optional) The domain name of the TFTP server.
dest_file - Specifies the destination file path name.
<path_filename 64> - The pathname specifies the pathname on the TFTP server. It can
be a relative pathname or an absolute pathname. This name can be up to 64 characters
long.
src_file - (Optional) Specifies the source file path name.
<pathname 64> - The pathname specifies an absolute pathname on the device file
system.
include - (Optional) Specifies to include lines that contain the specified filter string.
exclude - (Optional) Specifies to exclude lines that contain the specified filter string.
begin - (Optional) The first line that contains the specified filter string will be the first line of the
output.
<filter_string 80> - A filter string is enclosed by symbol. Thus, the filter string itself cannot
contain the character. The filter string is case sensitive. This string can be up to 80
characters long.
<filter_string 80> - (Optional) A filter string is enclosed by symbol. Thus, the filter string itself
cannot contain the character. The filter string is case sensitive. This string can be up to 80
characters long.
<filter_string 80> - (Optional) A filter string is enclosed by symbol. Thus, the filter string
itself cannot contain the character. The filter string is case sensitive. This string can be
up to 80 characters long.
include - (Optional) Specifies to include lines that contain the specified filter string.
exclude - (Optional) Specifies to exclude lines that contain the specified filter string.
begin - (Optional) The first line that contains the specified filter string will be the first line of the
output.
<filter_string 80> - A filter string is enclosed by symbol. Thus, the filter string itself cannot
contain the character. The filter string is case sensitive. This string can be up to 80
characters long.
<filter_string 80> - (Optional) A filter string is enclosed by symbol. Thus, the filter string itself
cannot contain the character. The filter string is case sensitive. This string can be up to 80
characters long.
<filter_string 80> - (Optional) A filter string is enclosed by symbol. Thus, the filter string
itself cannot contain the character. The filter string is case sensitive. This string can be
up to 80 characters long.
include - (Optional) Specifies to include lines that contain the specified filter string.
exclude - (Optional) Specifies to exclude lines that contain the specified filter string.
begin - (Optional) The first line that contains the specified filter string will be the first line of the
output.
<filter_string 80> - A filter string is enclosed by symbol. Thus, the filter string itself cannot
contain the character. The filter string is case sensitive. This string can be up to 80
characters long.
<filter_string 80> - (Optional) A filter string is enclosed by symbol. Thus, the filter string itself
cannot contain the character. The filter string is case sensitive. This string can be up to 80
characters long.
<filter_string 80> - (Optional) A filter string is enclosed by symbol. Thus, the filter string
itself cannot contain the character. The filter string is case sensitive. This string can be
up to 80 characters long.
log_toTFTP - Specifies to upload a log file from device to TFTP server.
<ipaddr> - The IP address of the TFTP server.
<ipv6addr> - (Optional) The IPv6 address of the TFTP server.
<domain_name 255> - (Optional) The domain name of the TFTP server.
dest_file - Specifies the destination file path name.
<path_filename 64> - The pathname specifies the pathname on the TFTP server. It can
be a relative pathname or an absolute pathname. This name can be up to 64 characters
long.