D-Link DGS-3000 series - Page 90

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
86
DGS-3000-26TC:admin#create access_profile profile_id 1 profile_name t1 ethernet
vlan source_mac 00-00-00-00-00-01 destination_mac 00-00-00-00-00-02 802.1p
ethernet_type
Command: create access_profile profile_id 1 profile_name 1 ethernet vlan
source_mac 00-00-00-00-00-01 destination_mac 00-00-00-00-00-02 802.1p
ethernet_type
Success.
DGS-3000-26TC:admin#create access_profile profile_id 2 profile_name 2 ip vlan
source_ip_mask 20.0.0.0 destination_ip_mask 10.0.0.0 dscp icmp type code
Command: create access_profile profile_id 2 profile_name t2 ip vlan
source_ip_mask 20.0.0.0 destination_ip_mask 10.0.0.0 dscp icmp type code
Success.
DGS-3000-26TC:admin#create access_profile profile_id 4 profile_name 4
packet_content_mask offset_chunk_1 3 0xFFFF offset_chunk_2 5 0xFF00
offset_chunk_3 14 0xFFFF0000 offset_chunk_4 16 0xFF000000
Command: create access_profile profile_id 4 profile_name 4 packet_content_mask
offset_chunk_1 3 0xFFFF offset_chunk_2 5 0xFF00 offset_chunk_3 14 0xFFFF0000
offset_chunk_4 16 0xFF000000
Success.
DGS-3000-26TC:admin#
6-2 delete access_profile
Description
This command is used to delete access list profiles. This command can only delete profiles that
were created using the ACL module.
Format
delete access_profile [profile_id <value 1-512> | profile_name <name 32> |all]
Parameters
profile_id - Specifies the index of the access list profile.
<value 1-512> - Enter the profile ID value here. This value must be between 1 and 512.
profile_name - Specifies the name of the profile.
<name 32> - Enter the profile name.. The maximum length is 32 characters.
all - Specifies that the whole access list profile will be deleted.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete the access list rule with a profile ID of 1: