Enter/Exit Programming Mode UPC/EAN Global Settings
92
Cobalto™ CO5300 Scanner
UPC/EAN Global Settings
This section provides configuration settings for UPC-A, UPC-E, EAN 13 and EAN 8 symbologies,
and affects all of these unless otherwise marked for each feature description.
UPC/EAN Decoding Level
Decoding Levels are used to configure a bar code symbology decoder to be very aggressive to
very conservative depending on a particular customer’s needs. See
"Decoding Levels" on
page 239 for more detailed programming instructions.
UPC/EAN Decoding Level = 1
UPC/EAN Decoding Level = 2
UPC/EAN Decoding Level = 3
UPC/EAN Decoding Level = 4
UPC/EAN Decoding Level = 5
$CUNDL01
$CUNDL02
$CUNDL03
$CUNDL04
$CUNDL05
To Next Page
Loading...
Need help?
General
