Datalogic Cobalto C05300 - Code 5 Check Character Transmission; Code 5 Hex to Decimal Conversion

Code 5 Enter/Exit Programming Mode
Product Reference Guide 201
Code 5 Check Character Transmission
This feature enables/disables transmission of an optional Code 5 check character.
Code 5 Check Character Transmission = Don’t Send
Code 5 Check Character Transmission = Send
DEFAULT
Code 5 Hex to Decimal Conversion
This feature enables/disables the conversion of hexadecimal label data to decimal label data.
Code 5 Hex to Decimal Conversion = Disable
Code 5 Hex to Decimal Conversion = Enable
DEFAULT
$CC5CT00
$CC5CT01
$CC5HD00
$CC5HD01