Datalogic Cobalto C05300 User Manual

ACK NAK Options Enter/Exit Programming Mode
Product Reference Guide 25
ACK NAK Options
This enables/disables the ability of the scanner to support the RS-232 ACK/NAK protocol.
When configured, the scanner and/or host sends an “ACK” when it receives data properly, and
sends “NAK” when the data is in error.
Options are:
•Disable
• Enable for label transmission — The scanner expects an ACK/NAK response from the
host when a label is sent.
• Enable for host-command acknowledge — The scanner will respond with ACK/NAK
when the host sends a command.
• Enable for label transmission and host-command acknowledge
$CR2AE00
ACK/NAK Protocol = Disable ACK/NAK
$CR2AE01

ACK/NAK Protocol = Enable for label transmission
$CR2AE02

ACK/NAK Protocol = Enable for host-command
acknowledge
$CR2AE03

ACK/NAK Protocol = Enable for label transmission and
host-command acknowledge
DEFAULT

Datalogic Cobalto C05300 Specifications

General

Brand	Datalogic
Model	Cobalto C05300
Category	Barcode Reader
Language	English