Timeout: Laser Off After Single Line Scan Enter/Exit Programming Mode
Product Reference Guide
65
Timeout: Laser Off After Single Line Scan
As described earlier (see Capacitive Touch Button on page 2), pressing the top button can
cause the scanner to enter single scan line operation, allowing the scanner to more easily
target and read truncated bar codes, or aim at a single label fr
om amongst multiple bar codes.
This timeout defines the duration of time befor
e the laser is turned off after the button
(trigger) is released.
Laser Off After Single Line Timeout = Don’t turn off
the Laser
Laser Off After Single Line Timeout = Off after
1 Second
Laser Off After Single Line Timeout = Off after
2 Se
conds
Laser Off After Single Line Timeout = Off after
3 Second
s
Laser Off After Single Line Timeout = Off after
5 Se
conds
Laser Off After Single Line Timeout = Off after
8 Second
s
$CLOTM00
$CLOTM01
$CLOTM02
$CLOTM03
$CLOTM05
$CLOTM08
To Next Page
Loading...
Need help?
General
