78
Cobalto™ CO5300 Scanner
Scanning Features
Scan Modes
Raster Mode
Normally, the scanner operates in an omnidirectional ”raster” mode, simultaneously projecting
20 lines which form an omnidirectional scan pattern used for 1D reading functions.
Single Scan Line Mode
When the scanner’s top Touch Button is actuated, the scanner enters single scan line
operation, allowing the scanner to more easily target and read truncated bar codes, or aim at a
single label from amongst multiple bar codes as an ordinary handheld scanner would do. The
top green LED will change to red as the user touches the top green button. For example, it is
recommended to use single line operation to read the programming bar codes presented in
this manual.
To Next Page
Loading...
Need help?
General
