Datalogic Cobalto C05300 User Manual

Select Audio Jingle for Good Read Event Enter/Exit Programming Mode
Product Reference Guide 73
Good Read: When to Indicate
This feature specifies when the scanner will provide indication (beep or Jingle and/or LED)
upon successfully reading a bar code. Choices are:
• Good Read = Indicate after decode
• Good Read = Indicate
after transmit
• Good Read = Indicate after CTS goes inactive, then
activ
NOTE
This option, which uses CTS, is only valid for RS-232 interfaces.
e
$CBPIN00
Indicate Good Read = After Decode
$CBPIN01

Indicate Good Read = After Transmit
$CBPIN02

Indicate Good Read = After CTS Goes Inactive, Then
Active
DEFAULT

Datalogic Cobalto C05300 Specifications

General

Brand	Datalogic
Model	Cobalto C05300
Category	Barcode Reader
Language	English