Datalogic Cobalto C05300 - Code 4; Code 4 Enable;Disable; Code 4 Check Character Transmission

Code 4 Enter/Exit Programming Mode
Product Reference Guide 199
Code 4
The following options apply to the Code 4 symbology.
Code 4 Enable/Disable
Enables/Disables ability of scanner to decode Code 4 labels.
DEFAULT
Code 4 = Disable
Code 4 = Enable
Code 4 Check Character Transmission
This feature enables/disables transmission of an optional Code 4 check character.
Code 4 Check Character Transmission = Don’t Send
Code 4 Check Character Transmission = Send
DEFAULT
$CCREN00
$CCREN01
$CCRCT00
$CCRCT01