Datalogic Cobalto C05300 - Datalogic 2 of 5 Check Character Transmission; Datalogic 2 of 5 Minimum Reads

Datalogic 2 of 5 Enter/Exit Programming Mode
Product Reference Guide 141
Datalogic 2 of 5 Check Character Transmission
This option enables/disables transmission of an optional Datalogic 2 of 5 character.
Datalogic 2 of 5 Check Character Transmission = Don’t
Send
Datalogic 2 of 5 Check Character Transmission = Send
DEFAULT
Datalogic 2 of 5 Minimum Reads
This feature specifies the minimum number of consecutive times an Datalogic 2 of 5 label
must be decoded before it is accepted as good read.
I 2 of 5 Minimum Reads = 1
I 2 of 5 Minimum Reads = 2
DEFAULT
I 2 of 5 Minimum Reads = 3
I 2 of 5 Minimum Reads = 4
$CD2CT00

$CD2CT01
$CD2MR01
$CD2MR02
$CD2MR03
$CD2MR04