Enter/Exit Programming Mode Disable All Symbologies
80
Cobalto™ CO5300 Scanner
Disable All Symbologies
Scan this label to disable all symbologies.
Disable all symbologies
Coupon Control
This feature is used to control the method of processing coupon labels.
Options are:
• Allow all — allow all coupon bar codes to be decoded
• Enable only UPC/EAN — enables only UPC/EAN coupon decoding
• Enable only GS1 DataBar — enables only GS1 DataBar coupon decoding
To set this feature:
1. Scan the Enter/Exit bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover any unused bar
code
s on this and the facing page to ensure that the scanner sees only the bar code you
intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit bar code.
Coupon Control = Allow all
Coupon Control = Enable only UPC/EAN
Coupon Control = Enable only GS1 DataBar
$AD
$CCPCL00
$CCPCL01
$CCPCL02
To Next Page
Loading...
Need help?
General
