Datalogic Cobalto C05300 - Codablock F AIM Check; Codablock F Length Control

Enter/Exit Programming Mode Codablock F
196 Cobalto™ CO5300 Scanner
Codablock F AIM Check
Specifies if Check Digit calculation algorithm is AIM compliant or not.
Codablock F AIM Check = N
ot AIM compliant
Codablock F AIM Check = AIM compliant
DEFAULT
Codablock F Length Control
This feature specifies either variable length decoding or fixed length decoding for the
Codablock F symbology.
Variable Length — For variable length decoding, a minimum and maximum length may be set.
Fixed Length — For fixed length decoding, two different lengths may be set.
DEFAULT
Codablock F Length Control = Variable Length
Codablock F = Fixed Length
$CCFAC00

$CCFAC01
$CCFLC00
$CCFLC01