Datalogic Cobalto C05300 - Plessey Check Character Transmission; Plessey Length Control

Plessey Enter/Exit Programming Mode
Product Reference Guide 211
Plessey Check Character Transmission
Enables/disables transmission of an MSI check character.
Plessey Check Character Transmission = Disable
Plessey Check Character Transmission = Enable
DEFAULT
Plessey Length Control
This feature specifies either variable length decoding or fixed length decoding for the Plessey
symbology.
Variable Length. For variable length decoding, a minimum and maximum length may be set.
Fixed Length. For fixed length decoding, two different lengths may be set.
DEFAULT
Plessey Length Control = Variable Length
Plessey = Fixed Length