Datalogic Cobalto C05300 User Manual

Enter/Exit Programming Mode Handshaking Control
22 Cobalto™ CO5300 Scanner
Handshaking Control
The data interface consists of an RS-232 port designed to operate either with or without the
hardware handshaking lines, Request to Send (RTS), and Clear to Send (CTS). Handshaking
Control includes the following options:
• RTS — RTS is asserted during t
ransmissions. CTS is ignored.
• RTS/CTS — RTS is asserted during tran
smissions. CTS gates transmissions.
• RTS/XON/XOFF — RTS is asserted during t
ransmissions. CTS is ignored. XON and XOFF
gate transmissions.
• RTS On/CTS — RTS is always ass
erted. CTS gates transmissions.
• RTS/CTS Scan Control — RTS is asserted during transmissions.
CTS gates transmissions
and controls enable and disable state of scanner.
DEFAULT
Handshaking Control = RTS
Handshaking Control = RTS/CTS
Handshaking Control = RTS/XON/XOFF
Handshaking Control = RTS On/CTS
Handshaking Control = RTS/CTS Scan Control
$CR2HC00

$CR2HC01
$CR2HC02
$CR2HC03
$CR2HC04

Datalogic Cobalto C05300 Specifications

General

Brand	Datalogic
Model	Cobalto C05300
Category	Barcode Reader
Language	English